Buick 2011 Lucerne, Owner'S Manual

Page: 245 / 447

Black plate (88,1)
Buick Lucerne Owner Manual - 2011
3. Use the dial or call command to dial the number of
the third party to be called.
4. Once the call is connected, press
b g
to link all
the callers together.
Ending a Call
Press
c x
to end a call.
Muting a Call
During a call, all sounds from inside the vehicle can be
muted so that the person on the other end of the call
cannot hear them.
To mute a call, press
b g
, and then say “ Mute Call ” .
To cancel mute, press
b g
, and then say
“ Un ‐ mute Call ” .
Transferring a Call
Audio can be transferred between the Bluetooth system
and the cell phone.
The cell phone must be paired and connected with the
Bluetooth system before a call can be transferred. The
connection process can take up to two minutes after the
ignition is turned to ON/RUN.
To Transfer Audio From the Bluetooth
System to a Cell Phone
During a call with the audio in the vehicle:
1. Press
b g
.
2. Say “ Transfer Call ” .
To Transfer Audio to the Bluetooth System
From a Cell Phone
During a call with the audio on the cell phone,
press
b g
. The audio transfers to the vehicle. If the
audio does not transfer to the vehicle, use the audio
transfer feature on the cell phone. See your cell phone
manufacturers user guide for more information.
Voice Pass-Thru
Voice pass ‐ thru allows access to the voice recognition
commands on the cell phone. See your cell phone
manufacturers user guide to see if the cell phone
supports this feature.
To access contacts stored in the cell phone:
1. Press and hold
b g
for two seconds.
2. Say “ Bluetooth ” . The system responds “ Bluetooth
ready ” , followed by a tone.
4-88