Buick 2011 Lacrosse, Owner'S Manual

Page: 227 / 447

Black plate (54,1)
Buick LaCrosse Owner Manual - 2011
7-54 Infotainment System
Using the “ Digit Dial ” Command
The digit dial command allows a
phone number to be dialed by
entering the digits one at a time.
After each digit is entered, the
system repeats back the digit it
heard followed by a tone.
If an unwanted number is
recognized by the system, say
“ Clear ” at any time to clear the last
number.
To hear all of the numbers
recognized by the system, say
“ Verify ” at any time.
1. Press
b g
. For vehicles with a
navigation system, say “ Hands
Free ” , after the tone.
2. Say “ Digit Dial ” .
3. Say each digit, one at a time,
that you want to dial. After each
digit is entered, the system
repeats back the digit it heard
followed by a tone. After the last
digit has been entered,
say
“ Dial ” .
Once connected, the person called
will be heard through the audio
speakers.
Using the “ Re ‐ dial ” Command
1. Press
b g
. For vehicles with a
navigation system, say “ Hands
Free ” , after the tone.
2. After the tone, say “ Re ‐ dial ” .
Once connected, the person called
will be heard through the audio
speakers.
Receiving a Call
When an incoming call is received,
the audio system mutes and a ring
tone is heard in the vehicle.
. Press
b g
to answer the call.
. Press
c $
to ignore a call.
Call Waiting
Call waiting must be supported on
the cell phone and enabled by the
wireless service carrier.
. Press
b g
to answer an
incoming call when another call
is active. The original call is
placed on hold.
. Press
b g
again to return to the
original call.
. To ignore the incoming call, no
action is required.
. Press
c $
to disconnect the
current call and switch to the call
on hold.