Buick 2005 LeSabre Owner'S Manual Download Page 291

Page: 291 / 392

7. Turn the bulb socket

one-quarter turn
counterclockwise, while
pressing it firmly.

8. Pull the bulb socket straight out of the assembly.

9. Remove the old bulb by pulling it straight out.

10. Replace with a new bulb by pushing the bulb

straight into the socket until the bulb clicks
into place.

11. Turn the bulb socket one-quarter turn into the

assembly to lock it back into place.

12. Reverse Steps 1 through 5 to reinstall the

lamp assembly.

Taillamps and Back-Up Lamps

1. Open the trunk. See Trunk on page 2-14 for

more information.

2. Loosen and remove the seven fasteners that hold

the taillamp assembly in place. The assembly for
both sides is one piece. The entire piece must
be removed to replace any bulbs.

5-51

Summary of Contents for 2005 LeSabre









































































































































































































































































































































































































Search results

Summary of Contents for 2005 LeSabre

Reviews:

Related manuals for 2005 LeSabre

Brands by name

Popular brands

Buick 2005 LeSabre, Owner'S Manual

Search results

Summary of Contents for 2005 LeSabre

Reviews:

Related manuals for 2005 LeSabre

Brands by name

Popular brands