1
6.7
Replacing the (complete) cover
Tools needed
• 1 hexagon socket spanner size 2.5
• 1 hexagon socket spanner size 3
• 1 open-end spanner size 8
• 1 open-end spanner size 13
F1
F2
F3
F4
F5
F6
F7
F8
F9
F10
F11
Fig. ./1: Replacing the cover
1. With the cover open undo the fixing screw (F1) of the lever (F2) with the hexagon so
-
cket spanner size 3. Remove the lever and carrier (F3).
2. Undo the screws (F4) with the hexagon socket spanner size 2.5. Remove the cover
casing (F5).
3. Undo the hose screw fittings (F6) and (F11) with the open-end spanner size 8. Remove
the hose and hose screw couplings.
4. Undo the locknut (F8) of the feed rod (F9) with the open-end spanner size 13.
Remove the plain washer (F7), locknut and feed rod by unscrewing. Fit these parts to
the new cover, loosely at first.
5. Remove the whole cover from the shaft (F10). Carefully place the new cover on the
shaft, ensuring that the locking pin (see Fig. 6.7/2) in the cover engages with the corre-
sponding recess in the casing.
Fig. ./: Position of the locking pin
Servicing/maintenance
Summary of Contents for HB 700
Page 1: ...Operating Manual Hot Melt Applicator HB 700 HB 700 Spray...
Page 19: ...19...
