Buhnen HB 5010, Translation Of The Original Operating Manual

Page: 94 / 142

Operation
16
5.3 Setting the spray pattern (spray version only)
The spray pattern depends on the operating pressure of the tank system and the setting
of the spray air pressure.
Determine the optimum setting by turning the adjusting wheel at the spray air adapter kit
and repeated trials.
To set the adjusting wheel, carry out the following work steps:
• Unlock the adjusting wheel by pulling it up as far as it will go.
• Implement the desired setting.
• Lock the adjusting wheel against unintentional re-adjustment by pressing it back down
in the initial position.
Adjusting wheel
unlock
lock
Fig. 5/1: Adjusting wheel for spray air setting (spray version)