Specific security advice
5
1
Specific security advice
1.1
Possible dangers
Danger of burns
due to hot metal parts, hot melt material, and hot melt material vapors.
Therefore, always wear heat protection gloves.
1.2
Intended use
Heatable hoses are used as flexible connections between machines or machine parts.
They are used to transport melted hot melt material, such as from a tank system to the
manual application unit.
Attention!
Heatable hose type HP is only permitted for operation with BÜHNEN manual application
units of type HR, HS, HB 900 and HB 910.
Separation from and connection to manual application units may only be implemented by
electrically competent personnel.
1.3
Notes on safe operation
• The maximum permissible working temperature (T
max
, see type plate) may not be
exceeded. Too high temperatures will cause the pressure load capacity to sink. This
could destroy the hose.
• Release the system pressure before dismantling the heatable hose (see Part 2 of this
manual).
Danger!
Before every maintenance or repair work on the heatable hose
, remove the mains
plug from the tank system.
Otherwise, an adjacent radio control could accidentally activate the pump during the
maintenance or repair work.
Danger of burning caused by hot melt adhesive!
Summary of Contents for HB 5010
