Buhler SCS 104, Installation And Operation Instructions Manual

Page: 13 / 75

SCS 104
5.2.2 Lock Menu
Some menus can be locked to prevent inadvertently changing the settings of the unit. This requires setting a code. For informa-
tion on setting up or disabling the menu lock please refer to "Global Settings" (
toP ) under menu item toP > Loc .
The menu lock is not enabled at the time of delivery, all menu items can be accessed.
5.2.3 Overview of the menu items
When pressing the mode switch (28) in normal mode, the display will show the prompt code if the menu is locked. Enter the
right code by rotating the mode switch (28) and accept with a push.
If an incorrect code or no code is entered, the menu will not be unlocked and you will not be able to access all menu items.
If you forgot the password you can always enter master code 287 to access the menu; the menu will be unlocked.
The following image shows an overview of the menu structure.
Items with a dashed frame will only appear with the respective settings or with the respective status messages.
The factory defaults and settings ranges are specified in the overview as well as under the respective menu item. The factory de-
faults apply unless otherwise agreed.
Menu:
Top Settings
top
Globale Einstellungen
3
2 1
1.
2.
3.
Menu designation
Display
Brief description
Parameter:
Eingabe 5'C
-20 . . . 60 'C
6
5 4
4.
5.
6.
Value input
Factory preset
Parameter range
Auswahl oP
op haLf Lo hi
9
8 7
7.
8.
9.
Selecting from the list of values
Factory preset
Parameter range/selection
Optional menu navigation:
10
10. dashed box = Optional
11 Bühler Technologies GmbH BECS0031 ◦ 02/2020