Buhler FK308, Operator And Parts Manual

Page: 10 / 24

8” & 10” Unloading Auger
7
ASSEMBLY INSTRUCTIONS
1. Bolt the hopper and tube together using six ½” x 1 ¼” hex bolts, lock
washers, and hex nuts on the 10”. Use 3/8" x 1" hex bolts on the 8”.
2. Bolt the stand to the tube using four ½” x 1 ¼” hex bolts, lockwashers, and
hex nuts. The stands have a high and low position (see chart).
2. Bolt the rubber strips around the hopper using the metal strips and plates
supplied. Use ¼” x ¾” hex bolts, lockwashers, and hex nuts.
3. Hydraulic only – attach the two ½” x 18” hydraulic hoses from the valve
to the hydraulic motor.
4. Motor Drive only -
- Assemble motor mount using ¾” nuts.
- Mount 12" pulley on flighting and 3 ½” pulley on motor. Use a 1725 rpm
motor with 3 to 5hp and a B-54 V-belt.
- Mount belt guard using ¼” x 1" hex bolts and ¼” hex nuts.