TeraStation III iSCSI User Manual
11
Reconnect a TeraStation
To reconnect a TeraStation that was previously removed, register the device and connect a volume via the procedure
below.
1
Connect the TeraStation and power it on.
2
Click
Start
-
All Programs
-
BUFFALO
-
iSCSI Connection Tool
-
iSCSI Connection Tool
to open the iSCSI Connection
Tool.
For Windows 8, click the
iSCSI Connection Tool
.
3
4
The volume you just connected will be added as a local drive under Computer or My Computer.
Notes:
• If a volume is not formatted, it will not be added as a local drive. To format, select
Disk Management
from
Confi guration
menu in iSCSI Connection Tool.
• To connect multiple volumes at once, choose
Connect volumes
from
Confi guration
menu.
• To set the volume to automatically connect when the computer starts up. check
Connect on Start Up
.
• With Windows XP or Windows 2000, you cannot connect to volumes larger than 2 TB. If you have a volume that
exceeds 2TB, use the Logical Volume Manager (LVM) tool to create volumes smaller than 2TB before connecting.
2
Click
Register the iSCSI Device
.
Note:
If access control restrictions were set (from
Basic
-
Security
), you will be
asked to enter the username and password before continuing.
1
Select a TeraStation from Target.
2
Click
Connect
.
Note:
If access control restrictions were set (from
iSCSI Volumes
-
Create
Volume
), you will be asked to enter the username and password before
continuing.
1
Select the volume to connect to.
