1
LinkStation Expansion
LinkStation Live has a USB 2.0 port on the rear. This port can be used for adding an external
USB Hard Drive or a USB Printer, or for connecting to a UPS. LinkStation will share connected
USB devices, allowing everyone on the network to use them. To connect a USB hard drive to your
LinkStation, simply plug it into the USB port.
Once your USB hard drive is connected, turn to the “Disk Management” section of this manual
for information on configuring your LinkStation to use it.
To configure a USB printer, see “Installing a Printer”.
To configure UPS settings, see page 62.
Note that only one USB device may be used at a time. USB hubs are not supported.
