Buffalo HD-H0.6TGL User Manual Download Page 61

Page: 61 / 80

Advanced Settings

Maintenance (Initialization)

Pressing

Apply

for

Restore Defaults

from

Maintenance/Initialization

resets Admin

Password, Hostname, TeraStation Description,
NTP Settings, Workgroup Settings, Access
Restrictions, User Settings, Group Settings,
Mail Notifications, UPS Settings, Disk Sleep,
and Disk Backup. If you select the

Remain

option for

Admin Password

and then click

Apply

, the admin password will no longer be

reset when the INIT button on the TeraStation

is held down.

The

INIT

button on the rear of your TeraStation normally returns the

TeraStation to factory settings when held down for 15 seconds. This affects
Admin Password, Ethernet Frame Size, and IP Address. If the

Remain

option

has been selected on the screen below, then the Admin Password will not be
reset when the INIT button is held down.

Summary of Contents for HD-H0.6TGL

















































































Search results

Summary of Contents for HD-H0.6TGL

Reviews:

Related manuals for HD-H0.6TGL

Brands by name

Popular brands

Buffalo HD-H0.6TGL, User Manual

Search results

Summary of Contents for HD-H0.6TGL

Reviews:

Related manuals for HD-H0.6TGL

Brands by name

Popular brands