Buffalo GH160, Instruction Manual

Page: 2 / 48

UK
Safety Tips
Position on a flat, stable surface.
A service agent/qualified technician should carry out installation and any repairs if required. Do not
remove any components on this product.
Consult Local and National Standards to comply with the following:
o
Health and Safety at Work Legislation
o
BS EN Codes of Practice
o
Fire Precautions
o
IEE Wiring Regulations
o
Building Regulations
DO NOT immerse the electrical control box assembly in water, or use jet/pressure washers to clean
the appliance
Do not use the appliance for anything other than its intended use.
Always switch off and disconnect the power supply to the appliance when not in use.
Not suitable for outdoor use.
Keep all packaging away from children. Dispose of the packaging in accordance to the regulations
of local authorities.
If the power cord is damaged, it must be replaced by a BUFFALO agent or a recommended
qualified technician in order to avoid a hazard.
This appliance is not intended for use by persons (including children) with reduced physical, sensory
or mental capabilities, or lack of experience and knowledge, unless they have been given
supervision or instruction concerning the use of the appliance by a person responsible for their
safety.
Ensure water levels are maintained above the minimum indicated level in the Pasta Cooker.
Failing to maintain the required level may result in element failure.
The manufacturers of Buffalo products take every care to ensure that all products are safe. Steel
cutting procedures used to manufacture these items results in sharp edges. These sharp edges are
removed to the best of our ability; however we still insist the operator takes care when in contact
with this piece of equipment.
Switch off power to the Pasta Cooker, and remove the plug from the power socket whilst cleaning,
draining water, or filling with water.