5
UK
Cleaning, Care & Maintenance
If grease is permitted to accumulate, it will begin to carbonise into a hard substance that is extremely
difficult to remove. To prevent this, follow the cleaning steps below:
• Always turn OFF the appliance and disconnect from the power supply before cleaning.
• Allow the appliance to cool before cleaning, but for best results clean the plates when they are still
slightly warm.
• Use warm, soapy water and a damp cloth to clean the exterior of the appliance.
• Take care when using scrapers to remove cooking residues as they can damage the cooking surface.
• Dry thoroughly after cleaning.
• A BUFFALO dealer or qualified technician should carry out repairs if required.
Warning: Do not use steel wool as it may leave shards that could Contaminate
food.
Waste tray
• This appliance features a waste tray to collect any liquid or fats that run off during cooking.
• At least once a day, remove and empty the waste tray before washing with warm, soapy water.
• Warning: Do not remove the tray during or immediately after use as the contents will be
hot.
Troubleshooting
Fault
Probable Cause
Solution
Appliance not
working
The unit is not switched on
Check the unit is plugged in correctly and
switched on
Plug or lead is damaged
Call BUFFALO agent or qualified Technician
Fuse in the plug has blown
Replace the plug fuse
Power supply
Check power supply
Appliance does
not reach set
temperature
Faulty thermostat
Call BUFFALO agent or qualified technician
Faulty element
Call BUFFALO agent or qualified technician
Appliance heats up
but indicator light
does not come on
Indicator light has expired
Call BUFFALO agent or qualified technician
Power indicator
light comes on but
appliance does not
heat up
Faulty element
Call BUFFALO agent or qualified technician
Faulty thermostat
Call BUFFALO agent or qualified technician
Thermostat set incorrectly
Check thermostat
Appliance slow to
heat up
Cooking surface not clean
Clean cooking surface as instructed
Faulty element
Call BUFFALO agent or qualified technician
No power
Thermal cut-out switch is
activated
Press re-set switch on rear of unit
DB170_ML_A5_v3 20210820.indb 5
DB170_ML_A5_v3 20210820.indb 5
2021/8/20 16:24
2021/8/20 16:24