Buffalo CN219, Instruction Manual

Page: 15 / 108

Trouble Shooting
Fault Probable Cause Action
Does not heat No power Make sure the machine is plugged
in correctly
Switch set to OFF Set the switch to ON
Thermal Protector Switch has
activated
Reset Thermal Protector Switch
Thermostat set to low Adjust the thermostat
Mixing paddle does
not turn
No power Make sure the machine is plugged
in correctly
Mixing rod not fitted correctly Ensure mixing rod is correctly fitted
Motor Fault Call Buffalo agent or qualified
technician
Switch set to OFF Set the switch to ON
Tap leaks Tap not fitted correctly Empty machine and fit tap as per
instructions
Build up of debris Empty machine and clean tap as per
instructions
Sealing Gasket needs replacing Call Buffalo agent or qualified
technician
Water escaping
from boiler
Temperature too high Adjust the thermostat
Tank filled above MAX indication line Allow machine to cool then empty
the tank and refill to correct level
Sealing gasket needs replacing Call Buffalo agent or qualified
technician
Fault Probable Cause Action
Product leaks from
bottom of bowl
The bowl is not fitted correctly Empty machine and re-fit bowl as
per instructions
Sealing gasket needs replacing Call Buffalo agent or qualified
technician
Machine shuts
down while in use
The water level in the boiler tank has
fallen below the minimum level
Fill the boiler tank to max fill level
and reset Thermal Protector Switch
No water in boiler tank Fill the boiler tank to max fill level
and reset Thermal Protector Switch
If the machine malfunctions due to causes other than those listed or the proposed corrective
actions do not solve the problem please call a Buffalo agent or qualified technician
Technical Specification
Model Voltage Power Current
Capacity
(Litres)
Dimensions
h x w x d mm
Weight
(kg)
CN219
220-240V
50/60Hz
1006W
4.37A 5 465 x 410 x 280 7.3
UK