5
INTENDED USE
The Benelli by Buffalo Corp Classica eBike Series Classica26/Classica28 has an electric
pedal assist drive system (PAS). The drive assist system consists of a drive unit, a battery, a
computer control, and various electronic components (harness wires, sensors, and switches).
When the assist system is turned ON, the drive unit engages to provide power only while you
are pedaling. The amount of power provided by the drive unit depends on your pedaling force
and the assistance mode/level you set with the handlebar control unit. At anytime, if you stop
pedaling, the drive assist will disengage. The drive assist system power reduces progressively
and cuts off as the bike reaches a speed of 15.5 MPH or sooner if you stop pedaling. The
drive assist re-engages when speed drops below 15.5 MPH as long as the pedals are turning.
Whenever the drive assist system is turned OFF, you can pedal the bike normally. The drive
system will not engage.
The Benelli by Buffalo Corp Classica26/Classica28 is designed to be a city bike with the
intended use for paved roads, gravel or dirt roads that are in good condition and on bike
paths. Always observe the traffic rules when cycling on public roads. City bicycles are not
suitable for off-road use. Using this bicycle off road can result in serious injury and is never
recommended.
WHAT ARE E-BIKES?
Electric bicycles or “E-Bike” have a small electric motor that provides assistance to allow rides
to accelerate, climb hills, and overcome wind resistance more easily than manually powered
bikes. E-Bikes are not scooters or motorcycles although the classification of each State in the
United States is still very broad and sometimes put into similar categories. It’s important to
note the rules and regulations of the State you intend to ride in before use. The Benelli by
Buffalo Corp Classic E-Bike Series is associated with the general classification of bicycle-style
electric bicycles (BSEB) because it has an electric motor powered up to 750 watts that goes
slower than 20 miles per hour.
Even if you have ridden a bicycle for years, it is important for every person to read the
Owner’s Manual and understand it. Before your first ride, make sure you are comfortable and
confident when sitting on the bike. If an adjustment does not feel right or something feels
loose, check to ensure you are properly fitted to the bike. Pick a controlled environment, away
from cars, other cyclists, obstacles or other hazards for your first ride.
