4
*
Descaling
In hard water areas limescale can build up within the appliance after prolonged use. To descale the
appliance:
1.
Pour a solution of descaler and water into the reservoir.
2.
Turn the Brewing power switch On
.
3.
After approximately 4 minutes turn the appliance Off to allow the descaling solution to work through
the system.
4.
After approximately 10 minutes turn the Brewing power switch back On
. Allow the reservoir to
empty.
5.
Discard the solution collected in the jug.
6.
Fill the reservoir with clean water and turn the appliance back On to flush out the system and remove
any descaler residue. Discard the collected water and rinse the jug.
7.
The appliance is now ready for use
.
Troubleshooting
Technical Specifications
Note: Use a suitable descaler and follow the instructions on the container.
Note: BUFFALO recommend that this appliance is descaled every 3 months or more
frequently in hard water areas.
Fault
Probable Cause
Action
The unit is not
working
The unit is not switched on
Check the unit is plugged in correctly and
switched on
Plug and lead are damaged
Call BUFFALO agent or qualified technician
Fuse in the plug has blown
Replace the plug fuse
Power supply
Check power supply
Internal wiring fault
Call BUFFALO agent or qualified technician
Coffee is not
coming from the
filter basket
No water in reservoir
Turn Off and fill reservoir
Coffee is too compact within the
filter
Turn off, loosen coffee within the filter and
resume
Loud noise coming
from appliance
No water in reservoir
Turn Off and fill reservoir
Model
Voltage
Power
Current
Reservoir
Capacity
Weight
Dimensions
h x w x d mm
G108-A
230V 50Hz
2060W
9A
2.2 litres
5.8kg
465 x 205 x 385
