WCR-GN Firmware Version:
WCR-GN Ver.1.04 (R4.20/B1.13)
/
WCR-HP-GN Ver.1.00 (R0.06/B1.13)
Router Setting (For: PCCW, HGC PPPoE User)
Last Updated 28/04/2011 Hornington KB: http://kb.hornington.com
WCR-GN/WCR-HP-GN PPPoE Setting Page 1
Windows user can follow the Preparation for Buffalo Router
Setup Guideline first.
http://support.hornington.com/kb/question.php?ID=624
Hardware Setup of WCR-GN Router
(PPPoE):
1.
Power on Buffalo Router, and wait about 1 minute until the “
Diag
”
indicator off.
2.
To reset the router, please insert “
RESET
” hole by a paper clip for about
10 seconds, and wait for 1 minute. The “
Power
”, “
Wireless
” and
“
Router
” indicators will be
ON
, and other indicator will be OFF.
3.
Please connect your broadband service with a
network cable
(Or from
DSL modem
) to the “
Internet
” port on the ROUTER.
Then use another network cable to connect “
LAN1
” port on the
ROUTER to the Ethernet adapter on your PC.
