manualshive.com logo in svg

Buffalo AirStation HighPower WBMR-HP-GNV2, User Manual, Page: 78 / 99

Share
Download
Buffalo AirStation HighPower WBMR-HP-GNV2 User Manual Download Page 78

WBMR-HP-GNV2 User Manual

77

Chapter 6 - Trouble Shooting

Cannot connect to the Internet over wired connection.

•   Make sure that your AirStation is plugged in!

•   Check that the status LEDs of your AirStation are lit as below:

Power 

Green light is ON 

DSL 

Green light is ON or OFF (depending on your environment)

Internet  Green light is ON or flashing 

•   Make sure that your computer is set to [Obtain an IP address automatically]. (see appendix C)

•   Refer to the documentation provided by your provider, and make the correct ADSL settings.

•   Restart your AirStation.

Cannot access the web-based configuration utility.

•   See chapter 4 for instructions to open the AirStation’s configuration utility.

•   Enter the correct user name and password to login to the configuration screen.  The factory 

defaults are [root] (in lower case) for the user name and a blank password (enter nothing).  If you 
changed the password, enter the new password that you set.

•   Verify that your web browser is not set to use proxies.

•   Make sure that your computer is configured to [Obtain an IP Address Automatically]. (see appendix 

C)

•   Restart your AirStation.

Summary of Contents for AirStation HighPower WBMR-HP-GNV2




































































































Reviews:

No comments