Buffalo Tools KSPLIT19, Instruction Manual

Page: 30 / 31

KSPLIT19 GASOLINE POWERED KINETIC LOG SPLITTER INSTRUCTION MANUAL
30
EMISSION CONTROL SYSTEM WARRANTY
Buffalo Corporation
Your Warranty Rights and Obligations
The California Air Recourse Board, U.S. EPA and Buffalo Corp. are pleased to explain the Emission Control System Warranty on your 2018 model year
new outdoor power equipment engine.
California
In California, new spark-ignited small off-road equipment engines must be designed, built and equipped to meet the State’s stringent anti-smog
standards.
Other States, U.S. Territories
In other areas of the United States, your engine must be designed, built and equipped to meet the U.S. EPA emission standards for spark-ignited
engines at or below 19 kilowatts.
All of the United States
Buffalo Corp. must warrant the emission control system on your power equipment engine for the periods of time listed below provided there has been no
abuse, neglect or improper maintenance of your power equipment engine. Where a warrantable condition exists,
Buffalo Corp. will repair your power equipment engine at no cost to you including diagnosis, parts and labor.
Your emissions control system may include parts such as: carburetors or fuel injection system, ignition system, catalytic converters, fuel tanks, valves,
filters, clamps, connectors, and other associated components. Also, included may be hoses, belts, connectors, sensors, and other emission-related
assemblies.
Manufacturer’s Warranty Coverage:
The emission control system is warranted for two years. If any emissions-related part on your engine is defective, the part will be repaired or replaced by
Buffalo Corp.
Owner’s Warranty Responsibility
As the power equipment engine owner, you are responsible for the performance of the required maintenance listed in your owner’s manual. Buffalo
Corp. recommends that you retain all receipts covering maintenance on your power equipment engine, but Buffalo Corp. can not deny warranty solely
for the lack of receipts or for your failure to ensure the performance of all scheduled maintenance. As the power equipment engine owner, you should
however be aware that Buffalo Corp. may deny your warranty coverage if your power equipment engine or a part has failed due to abuse, neglect,
improper maintenance or unapproved modifications.
You are responsible for presenting your power equipment engine to distribution center or service
center authorized by Buffalo Corp. as soon as the problem exists. The warranty repairs should be completed in a reasonable amount of time, not to
exceed 30 day.
If you have any questions regarding your warranty rights and responsibilities, you should contact
Buffalo Corp. customer service representative at 1-866-460-9436 or write to info@buffalotools.com
DEFECTS WARRANTY COVERAGE
Adopted by the Air Resources Board, Buffalo Corp. warrants to the ultimate purchaser and each subsequent purchaser that the small off-road engine
(SORE)(1) has been designed,
built and equipped so as to conform with all applicable regulations; and (2) is free from defects in materials and workmanship that cause the failure of a
warranted part to conform with those regulations as may be applicable to the terms and conditions stated below.
(a) The warranty period begins on the date the engine is delivered to an ultimate purchaser or first placed into service. The warranty period is two years.
(b) Subject to certain conditions and exclusions as stated below, the warranty on emissions related parts is as follows:
(1) Any warranted part that is not scheduled for replacement as required maintenance in your Owner’s Manual is warranted for the warranty period
stated above. If the part fails during the period of warranty coverage, the part will be repaired or replaced by Buffalo Corp. According to Subsection (4)
below. Any such part repaired or replaced under warranty will be warranted for the remainder of the periods.