GENTRi9K 9000 Surge Watt / 7200 Running Watt Portable Tri Fuel Liquid Propane Gas & Gasoline & Natural Gas Electric Start Generator Manual
34
PORTABILITY KIT INSTALLATION
The manufacturer recommends that you properly install the
Portability Kit
when using your generator. Installing the
Portability Kit
is not required
for the GENTRI9K to operate, but is included with the generator purchase.
1. Locate the wheel and axle bolt and flat washer. (Figure 1).
2. Attach the wheel by aligning the frame with the wheel, and insert the flat washer first, then the axle bolt. Tighten until wheel is secure.
3. Install the mounting feet (Figure 2) onto the front of the frame. Inserting the bolts through the frame and add the mounting feet on both the left and
right side.
NOTE: To transport the generator, you can use the Armrest handle. Unlock the Quick Release Pin
on side of handle (Figure 3) to open/close the Armrest handle.
Figure 1
Figure 2
Figure 3
