AIRMOVER 3-SPEED UTILITY AIR BLOWER
2
ITEM # AIRMOVER
FEATURES:
AIRMOVER is intended to move air and to dry small areas where the
large air mover is not applicable such as crawl spaces, inside cabinets,
under counters, inside ceilings, basements, etc. AIRMOVER can also
be used as high velocity fan for household use.
•
3-Speed Settings: 1550 / 1300 / 1120 RPM
•
Max air volume: 900 CFM
•
1/3 HP
•
Two 115V outlets / 2 AMP
•
Daisy chain up to 5 units
•
10 ft. power cord
•
Low power draw with high velocity air flow
•
Easy carrying handle and stackable up to 4 units high
•
Easy and quick to disassemble for thorough cleaning and service
•
Easy cord wrap on handle
•
3-speed switch
•
4 air flow positions (0°, 20° Kickstand, 45° and 90°)
•
Create a powerful air flow to dry carpet and floors
IMPORTANT SAFETY INSTRUCTIONS
STOP!
Before using this product, if you have any questions regarding the hazard and safety notices listed in this manual and/or on this product,
call 1-636-532-9888, Monday - Friday, 8 AM - 4 PM Central Time.
Usage:
Avoid the use of extension cords if possible.
If you choose to use them, be sure they are sized adequately to handle the flow of
electricity. An undersized cord can overheat, short out and cause a fire.
NOTE:
1. To prevent electric shock, do not operate the unit in standing water. Never plug in or unplug the unit with wet hands or while standing
in water.
2. To avoid risk of injury, do not direct air flow at face or body.
3. To reduce the risk of fire or electric shock, do not use AIRMOVER with any solid-state speed control device.
4. Use only with GFCI protected receptacles.
5. Do not operate AIRMOVER with a damaged cord or plug.
6. Unplug AIRMOVER from the power supply before servicing or cleaning.
7. Do not run the power cord under carpeting. Do not cover the power cord with throw rugs, runners, or similar coverings. Place the
power cord away from traffic area to prevent tripping.
8. Do not allow children to play with or around AIRMOVER at any time.
9. Do not move or carry the AIRMOVER while unit is operating.
10. Only use AIRMOVER units together in the daisy chain.
11. AIRMOVER has an on-board circuit breaker. If the auxiliary outlet overloads, the circuit breaker will trip. If the breaker trips. unplug
the units and press the circuit breaker reset button. Plug the units back into the power source and turn on the switch.
