Buffalo Tech WZR-RS-G54 User Manual Download Page 11

Page: 11 / 102

1. Power down the Cable or DSL modem and the computer which will be used to conﬁgure the

AirStation router.

2. Plug the Cable or DSL’s LAN Ethernet cable into the AirStation’s WAN port. Initially, you may

need to unplug this cable from your computer, hub

or other router.
3. Plug the provided Ethernet cable into a LAN
port on the AirStation and plug the other end into

your computer Ethernet adapter’s (NIC) port. If

you plan to initially conﬁgure the AirStation via a

wireless connection, (not recommended), you may

skip this step.
4. Power on your cable or DSL modem, wait one
full minute, Power on the AirStation router, wait an-

other full minute and then power on the computer

which will be used to conﬁgure the AirStation. If

the red DIAG light on the AirStation is lit or ﬂashing

after several minutes of being powered on, please

consult Buffalo Technical Support.

Installation / Setup

Summary of Contents for WZR-RS-G54







































































































Search results

Summary of Contents for WZR-RS-G54

Reviews:

Related manuals for WZR-RS-G54

Brands by name

Popular brands

Buffalo Tech WZR-RS-G54, User Manual

Search results

Summary of Contents for WZR-RS-G54

Reviews:

Related manuals for WZR-RS-G54

Brands by name

Popular brands