Version: 110930
Sport-HD INSTRUCTION MANUAL Page 17 of 20
ERASE ALL VIDEO
Deletes all recorded clips, cue points, and playlists. This cannot be undone!
FORMAT DISK!!!
Formats a disk for recording. This menu item allows a new disk to be formatted for use. Once formatted, power
must be removed (always for at least 5 seconds), then restored. Format will erase any material that may exist
on the disk and erases all cue points and playlists. You will be asked to hold the REC key and press MARK to
confirm before formatting begins.
REC END MODE
The default is ANY XPORT KEY. While recording, the record process is stopped and playback mode is entered
whenever any playback related key such as STOP, CUE, or reverse scan (
) is hit while recording. If you
do not want to stop recording so easily, set this menu to ONLY STOP KEY.
MAXIMUM RECORD DURATION
Sets the maximum length of time that a clip will record. If set to zero (default), recording continues until disk is
filled. This is useful for applications where long term unattended recording is desired, especially when some
remaining disk space is needed.
OPERATIONAL PREFERENCES
Press SETUP, STOP to enter the OPERATIONAL PREFERENCES menu. Use the UP and DOWN arrows to
choose a selection and select it with the ENTER key.
CHANNEL QUANTITY
Allows setting the number of replay channels connected to the panel. When only one channel is used, the F1
key is not needed to select channels, so is available for other F-key features (see FUNCTION KEYS (F-KEYS)).
RECUE WHEN PLAY
When enabled, if playing at normal or slow motion speeds, the CUE key causes a clean cut to the
current
cue
(the one on the MENU display) without stopping or even pausing. Normally, the CUE key stops playback and
cues to a still. This works like a manual playlist step, continuing to the new cue point at the current speed.
When playing, enter any cue point number on the keypad then hit CUE to switch to the next cue, then repeat as
desired. If disabled (default), this feature can be used by holding HOME when hitting CUE (while playing, enter
cue number, ENTER, hold HOME, hit CUE).
BUMP AUTO START
When disabled, requires manual playing of the IN bumper clip after using a Bump I/O key. For more information
see BUMP I/O. Default is ENABLED. When enabled, a second part of this menu allows changing the IN
bumper delay, which delays at still after cueing the IN bumper before playing. Default is 10 frames delay.
KNOB SENSITIVITY
Reduces the overall sensitivity of the knob by two or four fold. If you feel the knob is too sensitive in all modes,
use this item to reduce it’s sensitivity.
JOG MAX SPEED
Limits the maximum speed the jog mode uses. Use the knob to set the fastest speed that the picture will travel
by turning the knob in the jog mode. The JOG MAX SPEED may be set from zero to 500% normal speed. The
default is 500%. This setting does not affect the fast jog mode.
JOG SENSITIVITY
Adjusts the speed the knob must be turned in the jog mode to reach the JOG MAX SPEED. This setting affects
the fast jog mode also. Default is 10 units (units are arbitrary).
SCANNING SPEEDS
By default, the scan keys (
&
) scan playback at 6 times normal speed. To change the speed of either
key, press SETUP, the scan key, turn the knob until the desired speed is shown, then press ENTER.
PLAYLIST SETUP MENU
See PLAYLIST SETUP in the OPERATION, PLAYLISTS section.
