www.buenoptic.net
Contact: [email protected]
Chapter
1 Product Overview
1.1 Product Overview
CANFDNET-100T/200T module is an intelligent CAN-bus communication interface that compatible with
TCP/IP protocol and supports one or two CAN (FD) channel. Using this module will enable PC to connect to
CAN-bus network via Ethernet bus.
CANFDNET-100T/200T module comes with an electrical isolation module, which could be used to avoid the
damage caused by the ground loop and enhance the system reliability when working under a tough environment.
CANFDNET-100T/200T module can use any TCP/IP Test software to directly finish CAN Bus message
sending, and receiving.
1.2 Parameters
Application as Ethernet based interface to the CAN (FD) bus
Cortex-M7 based Microcontroller (400M)
Ethernet 10M/100M
One or Two CAN(FD) channels
Baud rates up to 5Mbps
CAN 2.0A (11-bit ID standard frames) and 2.0B (29-bit ID extended frames)
Configuration software available through the Ethernet interface
Max data flow 5000/S (extend frame)
Operating temperature: -20 to +70
Physical size: (length) 105mm * (width) 84mm * (height) 28mm.
Powered by DC (10 to 30V)
1.3 Typical applications
CAN-bus network diagnosis and test
Auto electronic applications
Electric power communication network
Industrial control devices
High-speed and large data communications
1.4 Ordering Information
Part Number
Operating temperature
Interface
CANFDNET-100T
-20
℃～
+70
℃
OPEN5
CANFDNET-200T
-20
℃～
+70
℃
OPEN5
