Buell XB 2010, Service Manual

Page: 241 / 714

2.47
FRONT FAIRING, WINDSHIELD, AND MIRRORS:
FIREBOLT
REMOVAL
1. See Figure 2-205 . Remove two center (4) and four side
windscreen fasteners (3) to remove windshield (1).
2. Remove mirrors (2).
3. Remove turn signals (6). See 6.14 FRONT TURN SIG-
NALS and remove front fairing (5).
INSTALLATION
1. See Figure 2-205 . Position fairing (5) onto fairing support
bracket and install turn signals (6, 7). See 6.14 FRONT
TURN SIGNALS .
2. Install mirrors (2) with fasteners and tighten to 72-96 in-
lbs (8-10.8 Nm).
3. Install two center (4) and four side windscreen fasteners
(3) and tighten to 10-12 in-lbs (1-1.4 Nm).
1
7
6
5
4
2
3
sm00682
5. 1. Front fairing Windshield
2. 6. Mirrors Turn signal
7. 3. Turn signal fastener Side windshield fastener
4. 8. Center windshield fastener Well nut
Figure 2-205. Front Fairing and Windscreen: Firebolt
HOME
2010 XB Service: Chassis 2-161