Buell P3, Service Manual

Page: 200 / 440

2007 Buell P3: Engine 3-17
HOME
7. See Figure 3-25. Loosely install air cleaner box bracket.
8. See Figure 3-26. Roll chassis toward engine.
a. Lift chassis onto engine.
b. Raise lift.
9. See Figure 3-27. Attach hoist to frame using straps and
raise hoist until straps tighten.
10. Place jack under the motor. Use jack to raise motor.
11. Move jack backward.
12. See Figure 3-28. Install rear motor mount bolts.
a. Apply several drops of Loctite Threadlocker 271
(red) to last few threads.
b. Tighten to 30-33 ft-lbs (41-45 Nm).
Figure 3-25. Bracket, Left Side Air Cleaner
Figure 3-26. Move Chassis to Engine
7652
7651
Figure 3-27. Hoisting Bike
Figure 3-28. Installing Rear Motor Mount Bolts
7650
7623