5
MA391572_13.5
[Original Instructions]
7/01/2013
Loading CarbiMet™ Abrasive Paper Rolls
Install each of the four different grit size abrasive paper rolls in the appropriate position as
indicated on the HandiMet 2 cover panel.
1. Turn off the water flow.
2. Raise the cover panel.
3. Remove the protective cover
from the paper roll.
4. Thread the end of the paper roll
over ROLLER #1 and under
ROLLER # 2 WITH SPRING
(see Figure 3).
5. Slide the paper forward to the
PVC PLATEN.
6. Insert the paper between the PVC PLATEN and the PAPER EDGE GUIDE.
Advancing the Abrasive Paper
1. Turn off the water flow.
2. Using the palm of the hand, push the paper through the trim strip at the front end of the
HandiMet 2.
3. Remove the worn paper.
4. Turn on the water flow. The paper will automatically be clamped in place.
Figure 3 Abrasive Paper Installation Diagram