4
MA671635_13.1
[Original Instructions]
1/23/2012
Safety Terms
DANGER
!
WARNING
!
CAUTION
!
NOTICE
Installation
WARNING
!
Equipment Damage. Follow all locally approved procedures and safety practices when lifting and
installing this machine. Improper lifting can result in machine damage.
Select a location for your VibroMet 2 that provides an adequate working space and a power source.
Placement of the VibroMet 2 should be on a sturdy, level surface. Buehler Tech-Met
®
tables are highly
recommended.
Electrical Installation
Electrical Shock Hazard. A qualified electrical technician should perform electrical installation and
maintenance.
Electrical Shock Hazard. Do not change the power plug in any way. Buehler machines are
equipped with a polarized plug (one blade is wider than the other) and a ground pin. Polarized
plugs reduce the risk of electrical shock. This plug will fit in a polarized outlet only one way.
•
Disconnect the power supply before making any electrical adjustments.
•
Capacitors inside the machine may retain a charge even if the machine is disconnected from
the power supply.
Installation of the VibroMet 2 must comply with local electrical standards or codes of practice.
The Specification Plate is located on the back of the VibroMet 2. Check that Specification Plate values for
phase, voltage, current, and power consumption are compatible with the intended electrical supply before
installation.
DANGER
indicates a hazardous situation which, if not
avoided, will result in death or serious injury.
WARNING
indicates a hazardous situation which, if not avoided,
could result in death or serious injury
CAUTION
indicates a potentially hazardous situation which,
if not avoided, may result in minor or moderate injury.
NOTICE
indicates practices not related to personal injury.
