Explanation of the control unit
4
Logamax plus GB162-65/80/100 - Subject to modifications resulting from technical improvements!
9
4
Explanation of the control unit
4.1
General
The boiler is fitted with a control unit, the BC10 basic
controller (
fig. 2). This controller can be used to con-
trol the heating system.
Push on the control panel to open it (
fig. 2).
The BC10 basic controller is located on the left, behind
the door (fig. 3,
item. 2
).
The User Manual for the boiler is located in a compart-
ment on the rear side of the door (fig. 3,
item. 1
).
The BC10 basic controller consists of the following
components:
Mains switch
The mains switch (fig. 4,
item 1
) is used to switch the
boiler on and off.
"Reset" button
If a fault has occurred you may have to restart the boiler
by pressing the "Reset" button (fig. 4,
item 2
).
This is only required in the event of a "locking" fault.
"Blocking" faults are reset automatically as soon as their
cause has been removed. The display shows
[\/r/e|
dur-
ing the reset operation.
fig. 2
Opening the control panel
If your heating system consists of several
boilers (cascade system), you have to carry
out the settings on the control units of all
individual boilers.
fig. 3
BC10 and User Manual
2
1
fig. 4
BC10 basic controller
1
2
3
4
5
6
7
11
10
9
8
