SETTING THE TIME
1. In standby mode, press and hold the TIME button, the
display will flash. Set the time using the HR (hours) and MIN
(minutes) buttons.
2. Press the TIME button to confirm and save.
Note: If no button is pressed for 4 seconds while setting the
time, the time displayed will be saved.
SETTING THE ALARMS
1. In standby mode, press ALARM 1 to set alarm to buzzer or
radio. The corresponding indicator will light up and the display
will blink.
2. Set alarm time using the HR and MIN buttons.
3. Press ALARM 1 again to confirm and save.
Repeat steps 1 - 3 with ALARM 2 button to set alarm 2.
STOPPING THE ALARMS
1. Press SNOOZE to temporarily stop the alarm. Alarm will
sound again after 9 minutes.
2. Press OFF or ALARM 1/2 to stop the corresponding alarm.
Alarm will sound again at the same time the next day.
3. In standby mode, press ALARM 1/2 repeatedly until the
alarm indicator light is off to cancel the corresponding alarm
permanently.
SLEEP FUNCTION
To fall asleep to the radio, turn on and tune radio to the desired
station, then press SLEEP repeatedly to set the sleep time
(90-80-70-60-50-40-30-20-10-OFF minutes). The radio will
automatically turn off after the specified time.
To cancel the sleep function, repeatedly press the SLEEP
button until the display shows off.
USING THE RADIO
In standby mode, press the ON/OFF/BAND button to turn on the
radio. The radio will play on the FM band and the FM indicator
will light up. Press the ON/OFF/BAND button to switch between
FM and AM. Adjust the volume using the and -
buttons. To turn off the radio, hold the ON/OFF/BAND button.
MANUAL SEARCH
Tune to desired radio station using the and - buttons.
AUTOMATIC SEARCH
Press and hold either the or Tuning - button to
automatically search for stations with strong signals. To search
for stations with weak signals, use manual search as above.
To enhance radio reception, extend the wire antenna or move
to a location where it can capture a stronger signal.
PRESET STATIONS
This unit can store up to 20 radio presets for each AM and FM.
STORE PRESETS
1. Tune to the desired radio station.
2. Hold the PRESET button for 1 second, P01 will blink on
screen.
3. Select the desired preset number using the P+ and P-
buttons.
4. Press the PRESET button to save.
5. Repeat steps 1 - 4 to save up to 19 more presets.
LISTEN TO PRESETS
Press PRESET, P01 will blink on screen.
Press PRESET repeatedly, or P+/P- to reach desired preset.
