PACKAGE CONTENTS
Before attempting to use this unit, please check the
packaging and make sure the following items are contained
in the shipping carton:
• Metallic Bluetooth
®
Speaker
• Micro-USB charging cable
• 3.5mm AUX cable
• User manual
CHARGING
1. Insert the micro-USB end of the included cable into the
charging port on the back of the Metallic Speaker.
2. Insert the USB end into a powered USB source such as a
computer, laptop or USB wall charger. The charging indicator
will light up red.
NOTE: Please fully charge the Metallic Speaker prior to first
use.
POWERING ON
1. Slide the
power switch
to the
ON
position and the display
will light up. The Metallic Speaker will enter
Bluetooth
®
mode
.
2. Slide the
power switch
to the
OFF
position to power down
the Metallic Speaker.
BLUETOOTH
®
MODE
PAIRING A DEVICE AND PLAYING AUDIO
1. After turning on the Metallic Speaker it will enter
Bluetooth
®
mode
. The LED indicator light will flash blue on the back of the
unit, this indicates that the Metallic Speaker is waiting to be
paired.
While pairing remain within one metre of the earphones.
2. Using the controls on your
Bluetooth
®
device, select
BD-MTLSPK-1
in your
Bluetooth
®
settings menu. If your device
requires a password, enter
0 0 0 0
.
Refer to the manual of your
device for specific instructions on pairing and connecting
Bluetooth
®
devices.
3. Once pairing is successful, the LED display will stop flashing.
Audio played through the connected
Bluetooth
®
device will now
be heard through the Metallic Speakers.
4. Use the controls on your connected device to select and
begin to play audio. To
play/pause audio
,
skip songs
or
change the volume
use the controls on the top of the Metallic
Speaker or the controls on your connected device.
ANSWER PHONE CALLS
1. To accept a phone call, firstly pair your mobile with the
Metallic Speaker via
Bluetooth
®
. Once paired, press the
answer/hang up button
located on the top of the Metallic
Speaker to accept an incoming call. You can now speak
through the inbuilt microphone.
2. To end the call, press the
answer/hang up button
once
more.
NOTE: You can also use the controls on your mobile phone.
TF/ MICRO SD CARD MODE
1. Insert your TF or microSD card into the slot located on the
back of the Metallic Speaker. The speaker will begin to play the
mp3 files stored on the card.
2. Use the controls located on the top of the Metallic Speakers
to
play/pause
,
adjust volume
or
skip songs
stored on your TF
or microSD card.
AUX LINE-IN MODE
1. Insert a 3.5mm AUX cable into the AUX port located on the
back of the Metallic Speaker. Press the
mode button
until
you reach the
AUX Line-In mode
.
2. Begin playing audio via your connected AUX device and the
sound will be played through the Metallic Speaker.
FM RADIO MODE
1. Plug in the micro-USB cable into the charging port on the
back of the device. Press the
“M”
(mode) button twice to reach
FM radio mode.
The speaker will sound “radio mode”. If the
speaker sounds “
Bluetooth
®
ready to pair”, short press the
"M”
button
again.
2. Scan through radio stations by pressing the
previous
and
next buttons
.
3. For
auto-tuning
, press the
pause button
once. The speaker
will now search for radio channels automatically.
NOTE: For radio operation, ensure the micro-USB cable is
plugged in (the USB end does not need to be connected) to act
as an aerial. The AUX cable (included) can also be used as an
aerial by connecting one end of the 3.5mm AUX cable to the
back of the unit via the AUX Line-In port.
TECHNICAL SPECIFICATIONS
Input: DC5V
Output Power: 3W x 2 (RMS)
Battery: LitIon 1200mAh
Battery life: 4 hours at 80% volume
Frequency: 50Hz-20KHz
Input Sensitivity: 400mV
Signal to Noise Ratio: ≥88Db
External Magnetic Horn: 40mm x 2
Bluetooth
®
: Version 3.0.
