5. Secure your secondary positioning lanyard (not to exceed a 2’ fall) around tower leg (Fig.15)
6. Once secure, reposition the Buck Hook™ to the next highest point ensuring the bottom of the fiberglass pole is
below the feet at all times while ascending.
7. Disconnect secondary positioning lanyard.
8. Repeat steps 4 – 7 until desired height is reached
Note: In the event the fall arrester is impacted it will need to be unlocked. To unlock, remove weight from the fall
arrester then press the locking wheel towards the rope and slide the fall arrester up the rope a few inches until you
hear a click. The fall arrester is now unlocked (Fig. 10).
a. Depress silver button on side of locking wheel b. Insert rope into channel of Fall Arrester
`
c. Attach carabiner to Fall Arrester Unlocking
PN 230316 – Buck Hook™
System Inst / Warn (Rev. 1/21/15)
2 of 5
Fig. 5
Fig. 6
Fig. 13
Fig. 7
Fig. 9
Fig. 14
Fig. 15
Fig. 10
Fig. 11
Fig. 8
Fig. 12
