•
Be certain this equipment is suitable for the intended use and work environment. If suitability for intended use is in doubt, consult a
safety engineer or contact Buckingham Mfg. before using.
•
Destroy any and all equipment subjected to impact loading.
•
Only Buckingham Mfg. Co., or those authorized in writing by Buckingham Mfg. Co., may make repairs to this equipment.
•
Remove from service if subjected to impact loading. Even though no visible signs are present, internal damage may have occurred thus
reducing its strength and margin of safety.
•
Lubricate the gate on carabiner at least weekly or as often as required to maintain smooth operation (no binding) with light weight
lubricant such as WD-40
®
.
•
Product covered under these instructions / warnings should not be resold / redistributed or re-used after use by original user.
Detailed Inspection
In addition to the inspection before, during and after each use, it is recommended that a detailed inspection by a competent inspector be done at
least every 3 months (or more frequently, depending on amount and type of use). Make a copy of these instructions and use one as a permanent
inspection record; keep the other with the equipment. It is best to issue new gear to each user so they know the entire history.
Date of Purchase:
Date of Issue:
User:
Date
Inspection Results
Inspector
Buckingham Mfg. Co.
Binghamton, NY
1-800-937-2825
Information contained in these written instructions supersedes all other information (written, audio, video etc.) produced by Buckingham
Mfg. prior to the revision date of this document.
Rigging Carabiner Rev. 09/12/19 2 of 2
PN 230450
