Ergovation.Doc 11-3-08 Rev. 8-26-09
P a g e
|
10
PN 230216
Final assembly of Abdominal Stabilization
System should look like this.
NOTE:
Loop side (J) ready to accept hook side (K)
Notice loop side (J) is longer to prevent
chafing of hook side (K) in the abdomen
region
Step5
Warning
Abdominal Stabilization System is for support and comfort only, do not over
tension to increase snugness of fit!!
If stabilizer is too loose or tight you may need to go up or down a size in the
Back pad or loop side (J short, medium or long) of the stabilizer.
When attaching the elastic Abdominal Stabilization System: tighten the
abdominal muscles by tightening the abdomen as if you were doing a crunch,
then secure the Velcro
®
. Be sure not to hold your breath when you fasten the
Velcro
®
, as this will cause over-tightening.
If abdominal stabilizer loses its elasticity over time replace with new stabilizer