5 | Installation
Büchi Labortechnik AG
38/78
Operation Manual Rotavapor® R-250 Pro
u
Install the cooling water temperature sensor in
the cooling water outlet of the condenser.
u
Connect the sensor cable to the related
connection on the instrument. See Chapter 3.2
"Configuration", page 13
5.8.3
Installing the foam sensor (option)
Precondition:
R
The distribution piece has the option to install
a foam sensor.
u
Attach the foam sensor to the to the
distribution piece.
u
Connect the sensor cable to the related
connection on the instrument. See Chapter 3.2
"Configuration", page 13
u
If necessary, adjust the sensor. See
Chapter 10.7 "Adjusting the foam sensor",
page 57
5.8.4
Installing the cooling water flow sensor (option)
u
Attach the cooling water sensor to the
instruments with screws.
u
Install the cooling water sensor within the
cooling water supply.
u
Secure the hoses in place with hose clamps.
