manualshive.com logo in svg

Buchi F-305, Operation Manual, Page: 6 / 42

Share
Download
Buchi F-305 Operation Manual Download Page 6

1 | About this document

BÜCHI Labortechnik AG

6/42

Operation Manual Recirculating Chiller F-305 / F-308 / F-314

Symbol

Meaning

Symbol

Meaning

Hot surface

Health-harming or irritant
substances

Risk of hand injury

Strong magnetism

1.2.2

Mandatory directive symbols

Symbol

Meaning

Symbol

Meaning

Wear safety goggles

Wear protective clothing

Wear protective gloves

Heavy load, do not lift with-
out assistance

1.2.3

Other symbols

NOTE

This symbol draws attention to useful and important information.

R

This character draws attention to a requirement that must be met before the in-
structions below are carried out.

u

This character indicates an instruction that must be carried out by the user.

5

This character indicates the result of a correctly carried out instruction.

1.3

Available languages

These operating instructions were originally produced in German and have been
translated into several other languages. The translations are available on the en-
closed CD or can be obtained as a PDF file via http://www.buchi.com.

Summary of Contents for F-305











































Reviews:

No comments