Buchi DuMaster D-480, Operation Manual

Page: 155 / 354

Operating instructions DuMaster D-480 ©BÜCHI Labortechnik AG
7 - Using the instrument 155
Setting the size of the graph with the mouse
Proceed as follows:

Drag a rectangle in graph view using the mouse.

The selected area is displayed larger.
Setting the zoom factor back to 1
By clicking the button at the upper left corner of the graphic filed you can set the zoom factor from
any value back to 1.
Configure report
Configure report
Proceed as follows:

Open the "Configure Report" dialog by selecting
File > Report configuration
.

Define the print settings as required:

Enter up to three headers in the "Title" section.

Check the appropriate options in the "Report options" section.

Click
OK
. This closes the dialog and saves the settings.
Display print preview
Display print preview
Proceed as follows:

Open the "Configure report" dialog in the operating software by selecting
File > Print preview
.

Define your report settings. See
Configure report
(on page 155). You can also change the
report type in this dialog below the icon. Then click
OK
. Print preview is displayed.

Assess the print preview:

The
Next
and
Previous
buttons allow you to browse multiple page documents.

The
Two Pages
and
One Page
buttons allow you to view two pages next to each other or a
single page.

The
Zoom in
and
Zoom out
buttons allow you to zoom the document in/out in order to see
it better.

Decide:
If the print preview...

... is OK and you want to print out the document: Click
Print
. The "Configure report" dialog
is displayed again, click
OK
. The "Print" dialog is displayed.

... is not OK and you want to change it: Click
Close
. Open the "Configure Report" dialog by
selecting
File > Report configuration
. See
Configure report
(on page 155).