Assembly/Operation Instructions
Unpack the bath and change table carefully, checking the
contents against the parts list to ensure all parts are
present.
Attach the two side frames (3) to the left side panel (1) by
inserting bolts (12) for 8 bottom holes on both sides. Insert
(13) for the 4 top end holes in the side panel, then tighten
into the threaded ends of the side frames using the
supplied tool (16).
Attach the right hand panel (2) in the same fashion.
Turn the bath and change table on its side as shown, then
attach the padded top (5) inserting two bolts into the
tubing of the padded top before fully tightening the bolts.
Slip the elastic loops of the mesh bag (10) over the bolt
heads, then tighten. Carefully turn the bath and change
table over and secure the opposite side with two more
bolts.
Attach the wheels (11) of the bath and change table, push
the wheels firmly into position along the slots provided.
Ensure the wheels are locked when using the bath and
change table.
Attach the base shelf (6) by placing the shelf in position,
then securing with flaps (A) wrapped around the uprights
of the two side frames (3), and with the flaps (B) wrapped
around and under the bottom of the frames.
Attach the utility holders (9) by hooking them over the
front of the support frame for the padded top (5).
Attach the pan trays (8) by hooking each tray over the tops
of the two side frames (3) as shown.
The bath (7) can then be places in the top of the bath and
change table.
The bath comes complete with a handy drainage hose (14), which can be attached to the outlet on the
underside of the bath. Before placing water in the bath, ensure the plug (15) is firmly locked into the plug
hole inside the bath.
When using the bath, extreme care should be taken to ensure the water is of a suitably safe temperature
before placing your child in. Do not use the bath separate from the frame.
Always apply studs (17) while the changing mat is hanging.
Maintenance
•
The bath and change table can be cleaned with a household spray polish.
•
The surface of the shelves should be wiped using a damp cloth.
•
NEVER clean with abrasive, ammonia based, bleach based or spirit type cleaners.
