Recommended ways to position the bottles and accessories
6 x 125ml or 260ml bottles
1.
Place 6 teats on the cavities with the 'teats' symbols
surrounding centre stem.
2. Put the screw rings on top of the teats.
3. Put 3 bottle covers onto the slots of the centre stem, and
the other 3 covers on top.
4. Place the 6 bottles upside down on the cavities with the
'bottle' symbols.
3 x 330ml bottles
1.
Place 3 teats on the cavities with the 'teats' symbols
surrounding the centre stem.
2. Put the screw rings on top of the teats.
3. Place the 3 bottles upside down on the outer cavities with
the 'teat's symbols.
4. Put the 3 bottle covers inbetween the bottles.
After Use
1.
Leave the steriliser in the microwave for 2 minutes to cool down.
2. Carefully remove the steriliser from the microwave, gripping both handles carefully. Do
not remove the steriliser if it is too hot to touch.
3. Open the lid by unlocking the handles. Keep your face back away from the lid to allow
the hot steam to escape upwards.
4. Ensure your hands are clean. Use the tongs to remove the bottles and accessories from
the steriliser.
Cleaning
•
This steriliser can be cleaned with hot soapy water, and it is also dishwasher safe.
•
Ensure that it is well cleaned and thoroughly drained before each use.
Troubleshooting
If you have any problems, issues or concerns regarding the use of this product, please contact
the Kogan.com customer support team.
Do not use the product if it is damaged in any way, as this may reduce the effectiveness of the
sterilising process.
