To attach the foot rest
Place the footrest along the front of the seat
assembly. Press firmly to ensure it 'clicks' into
position.
To adjust the seat height
Squeeze the levers on both front legs of the chair
and raise or lower to the desired position.
To attach and use tray
1.
Attach tray by aligning it with the armrests,
and squeezing the lever under the front of
the tray, slide tray along armrests.
2.
To adjust tray, squeeze the lever under the
front of the tray and slide to 1 of 3 positions.
To lift the armrest
Press the button on the side of the armrest, then lift.
Harness restraints
To secure your child in the hardness, push buckle (a) and (b) into the
buckle housing (c), until the buckle prongs snap into position.
Carefully adjust the harness by pulling the slider (d) until the desired
fit is achieved in the lap, shoulder and crotch strap. To release the
buckle, squeeze the top and bottom prongs until it disengages.
•
CAUTION: The harness must be used at all times and be
correctly adjusted.
To fold the high chair
1.
Remove tray.
2.
Squeeze levers on both rear legs of the
chair and slide upwards while pushing the
rear legs towards the front legs.
3.
The tray can be stored by placing it on the
buttons that are located on the rear legs.
Cleaning
To ensure the long-lasting use of your high chair, wipe down with a damp cloth
and use a mild soap solution if necessary. Do not use abrasive cleaners. Always
store product in a clean, dry place.
Maintenance
Always check parts regularly for the tightness of screws, nuts and other
fasteners – tighten or replace if required.
