Bubble 4b half pod, User Information

Page: 10 / 13

10
Re build in reverse order.
It is possible to fit the wood burning grate which just drops directly onto the coal burning grate.
Riddling Grate Carrier.
The riddling grate carrier supports the riddling grate.
To remove it first remove the riddling grate.
Remove the baffle.
Remove all the firebricks.
Then lift out the riddling grate frame.
When replacing, it is important that the frame is flat and sitts snugly down on to the fixed hearth plate.
The Firebricks.
CORNER STOVES FIREBRICKS
The firebricks comprise of -:
One centre rear.
One right side and one left side.
Ditto-small fillet bricks at either side front which can be secured with fire cement.
They are self supporting and are fitted-:
Rear centre first.
Sides next.
Small fillets to lock the assembly in place.
3B STOVES FIREBRICKS
Comprise of two base bricks, two rear back bricks, one off left and one off right side bricks.
4B STOVES FIREBRICKS
Comprise of two rear back bricks, one off left and one off right side bricks.
The firebricks are consumable items and will need to be replaced from time to time.
I f the stove is left to run with damaged fire bricks the outer steel panels could burn through.
Keeping the stoves clean.
To clean the stove externally allow it to go out and simply give it a slight dusting with a very soft small brush.
To clean the brass work, where stoves are supplied with brass fittings it is advisable to remove all the fittings
for cleaning.
Clean the chimney.
Make sure that the flue pipe and chimney are always kept clean and clear from obstruction. N.A.C.S. registered
chimney sweeps should be employed to regularly sweep the chimney and keep it in good working order.
To remove the front fret.
Let the stove go out, open the front door, clean the ashes out and simply lift the front fret up vertically, twist
slightly and remove.
Before replacing it, make sure that all the ash is removed from the base of the left and right side fasteners.