![background image](http://html1.mh-extra.com/html/btwin/elops-920e/elops-920e_user-manual_3084632007.webp)
7
SCREEN AND CONTROL ELEMENTS
Screen data and function
11
7
6
12
10
2
5
3
4
1 13 8
9
6
KM
1
Power assistance mode (0-1-2-3):
»0» no power assistance.
»1» is the default power assistance mode.
Each mode corresponds to the maximum assistance speeds set out below:
Mode
0
1
2
3
Maximum assistance speeds**
No assistan
-
ce
+50% assistance
+120% as-
sistance
+190% as-
sistance
Average autonomous range***
/
50 - 90 km
2
ON/OFF button:
Switch the electrically-assisted bicycle on and off by holding the button down for a few seconds.
Scroll through the route information (TRIP, ODO, TRIPtoGO) with a short press.
3
«+» button:
Step up to the higher power assistance mode by briefly pressing the button
Switch to «walk assist» mode by holding the button down for a few seconds.
4
»-» button:
Step down to the lower assistance mode
5
Lighting button
The lighting on the bicycle can be switched on and off by briefly pressing the button
Go to the settings by holding the button down for a few seconds
6
Speed indicator**
7
6
KM
«Walk assist» mode:
For walking beside the bicycle in walk assist mode, up to 6 km/h, without pedalling.
Please note that this mode should not be used when
riding the bicycle
8
ODO: Records the total distance travelled. It cannot be reset to zero.
TRIP: Records the partial distance travelled.
TRIPtoGO: Remaining distance that may be covered with the power assistance mode.