BTV BTV3, User Manual

Page: 10 / 13

Troubleshooting
I don’t see any picture on my TV:
•
Make sure your TV is turned on.
•
Make sure the connectors on the cables between your BTV player and your
TV are pushed completely in.
•
Make sure the video input on your TV is set to match the HDMI used with the
BTV. Most TVs have an input button on the remote to change video inputs.
•
Make sure the power cable for the BTV player is connected to the BTV player
on one end and to a working power source on the other end. If the BTV
player is powered, the light on the front of the BTV will be blue.
I cannot connect to my wireless home network:
•
Adjust the location of the BTV closer to the modem or router.
•
Do not place the BTV player in an enclosed cabinet; it may interfere with the
wireless signal. Connecting to the Ethernet will give you the best signal
strength.
•
Make sure you select the correct Network name and enter the correct
password. Remember that the password is case sensitive.
I’m still having trouble:
•
Reset your Internet Modem by disconnecting the power cord for 30 seconds,
and then re-connecting the power cord back to the modem.
•
Restart your BTV Player by disconnecting the power cord from your BTV for
3 seconds, and then re-connecting the power cord back to the BTV.
9