bto X-Book 15CL879, Manual

Page: 37 / 216

31
Engl
ish
Audio Features
You can configure the audio options on your computer
from the
Sound control panel in Windows .
The volume may be adjusted by means of the Fn + F5/F6
key combination.
Setup for 5.1 or 7.1 Surround Sound
To setup your system for 5.1 or 7.1 surround sound you
will need to connect the audio cables to the Headphone &
S/PDIF Combo jack, Line-In jack, Line-Out jack and Mi-
crophone-In jack
(note: the Line-Out jack is used for 7.1
surround sound only) .
1. Run Realtek Audio Console from the Windows Start menu.
2. Click Device advanced settings .
3. Plug the front speaker cables into the Headphone & S/PDIF
Combo jack.
4. Plug in the cables (you may require an adapter to connect each
cable to the appropriate jack e.g a stereo mini to dual RCA
adapter) from your speakers as follows:
• Headphone & S/PDIF Combo Jack = Front Speaker Out
• Line-In Jack = Rear Speaker Out
• Microphone-In Jack = Center/Subwoofer Speaker Out
• Line-Out Jack = Side Speaker Out ( 7.1 Surround Sound
only )
5. As you plug in each cable a dialog “ Which device did you plug
in ?” box will pop up.
6. Select the appropriate device from the drop-down menu
according to the speaker plugged-in (e.g. Rear Speaker Out),
and then click
OK to save the setting.

Volume Adjustment
The sound volume level can also be set using the volume
control within
Windows . Click the Speaker icon in the
taskbar to check the setting .
P750TMP775TM CUG v2 CUG.book Page 31 Monday, July 30, 2018 2:22 PM