![background image](http://html1.mh-extra.com/html/bticino/sfera-video-kit/sfera-video-kit_user-and-installation-manual_2825214013.webp)
13
12
Sfera Proximity Reader
User and installation manual
1
Manager
master
2
Manager master badge
For safety reasons, a “
MASTER
” badge is required, directly programmed by the installer, providing
access to the programming of the other badges (apartment master, passepartout, and residents).
To access programming mode, a master badge must be allocated to the device. Up to 20 master
badges may be saved.
The proximity reader will confirm that the badge has been accepted by means of audible signals
and the switching on of the green LED.
The transmission of an unrecognised badge, or a programming error (e.g. memory full or badge
already used), will cause the interruption of the programming procedure. This interruption is
confirmed by a long beep, and the red LED coming on.
New manager master badge
2. Release the key and move the
system management key card
close to the reader so that it can
be registered.
The flashing of the green LED and a short beep confirm that the
manager master
badge has
been saved.
1. Press and hold down the programming pushbutton until the green LED starts flashing and a
confirmation tone is heard.
Summary of Contents for Sfera video kit
