13
12
Thermostat with display
Installer manual
5 Functions and operating modes
5.1 Heating and cooling function
The thermostat can be set for the management of four different functions, depending on the type
of system to install:
- heating function (only the heating is active);
- cooling function (only the cooling is active);
- cooling function in summer / heating function in winter;
- automatic changeover between cooling and heating (not available in MyHOME systems).
The setting of the function (with the exclusion
of the use as MyHOME probe) can be modi-
fied with an extended pressure of the
MODE
( > 7 seconds). The Mode key can disable the
function change (with the configuration by
MyHOME_Suite software).
Heating function
If the measured temperature is lower than the reference value, the heating system is activated and
the corresponding symbol appears on the display .
When the temperature is reached, the thermostat switches the zone off and the icon disappears.
Note
: The heating icon is always displayed
.
Cooling function
If the measured temperature is higher than the reference value, the cooling system is activated
and the corresponding symbol appears on the display .
When the temperature is reached, the thermostat switches the zone off and the icon disappears.
Note
: the cooling icon is always displayed
.
Summer / winter function
By configuring the thermostat both for the winter (HEAT) and the summer (COOL) functions, it is
possible to use it with the heating system in winter, and the cooling system in summer.
The icons shown on the display will be the same as the ones previously described for the heating
and cooling functions.