22
9 mEmo CarD
7 Trouble shooting
ProbLEm
soLUtion
on pressing the Entrance panel activation/Cycling
( ) key no picture appears
- check that the handset and entrance panel have
been correctly wired and configured (must have
the same P address);
- the audio/video channel may be busy, wait for it
to become free and try again.
on pressing the Door lock (
) key the com-
mand is not performed
- check that the handset and entrance panel have
been correctly wired and configured (must have
the same P address).
on pressing the ok key the menu does not switch
on and the handset gives a busy sound
- the audio/video channel is busy, wait for it to be-
come free and try again.
When called the handset does not ring
- check that the handset and entrance panel have
been correctly wired and configured;
- check that the “Call Exclusion” function is not ac-
tive or that the bell volume has not been zeroed.
When called the handset rings but the monitor
does not switch on
- check that it has not been set as “slave”.
at the entrance panel it is difficult to hear the
caller
- check that the handset is not on “Mute”;
- reduce the volume of the entrance panel micro-
phone;
- you can communicate in PusH tO talk mode (see
description on next page).
at the handset it is difficult to hear the caller
- check the volume setting on the axolute Video
station;
- make sure that there are no strong noise sources
near the axolute Video station;
- you can communicate in PusH tO talk mode (see
description on next page).
Summary of Contents for AXOLUTE Nighter
