Bticino Axolute 349311, Installation Manual

Page: 12 / 28

12
Video Display
Completing the Quick Configuration
After the Axolute Video Display has been configured and switched on the red “connection lED”
flashes, to indicate that the configuration must be finished.
Press any key, the Axolute Video Display display shows the language selection menu.
The display shows a mask summarising the configuration
made
The display and the connection lED go out.
The Axolute Video Display is ready for normal working.
4 QUICK CONFIGURATION
INTERCOMMUNICATING
: intercommunicating call to the handset with address N
same as the number indicated by the icon selected. (e.g.: INTERCOMMUNICATING 4
intercommunicating call address to the handset with N = 4)
CAMERA
: direct activation of the camera with the same address as the associated Entrance
Panel increased by a number equal to that indicated by the icon selected. (e.g. CAMERA 2
activates the camera with address P+2)
ACTIVATION
: activation of the actuator with the same address as the associated Entrance
Panel increased by a number equal to that indicated by the icon selected.
(e.g. ACTIVATION 3 opening of the Entrance Panel door lock (configured with P+3) directly
without the call or activation of actuator item 346200 (configured with P+3 and MOD=5)
or activation of actuator item 346230 (configured with P+3)
CYCLE CAMERAS : cyclically activates the cameras in the system starting from the associa-
ted Entrance Panel P (just one complete cycle is performed)
Select CONFIRM
Select the language required from those
offered
Press OK to confirm the selection
Press
OK
to confirm the configuration
STAIRCASE LIGHTS: activates the relay which switches the staircase lights ON/OFF
SUMMARY CONFIG.
ADDRESS N : 01
ADDRESS P : 02
MODE M : 06
> CONFIGURATION END
LANGUAGE SELECT.
LANGUAGE: -
> CONFIRM