2
Technical information
• Operating temperature: 5°C ÷ 35°C
• Power source: 2 LR6/AA 1.5V alkaline batteries
• Minimum time between a programmed operation and the next:
15 minutes
• Temperature values that can be set: 3°C ÷ 40°C
(with a 0.1°C minimum interval)
• Accuracy of controlled temperature: ± 0.5°C
• Average battery life: 1 year
• Flush-mounting or wall-mounting installation
• Voltageless output contact rate: 5(3)A; 250 Vac
• Possibility of connecting an external probe for a temperature (item
3457) with the following features: R (25°C) = 10k
BETA = 3435 - max. connection length 10 metres
• Possibility of remote controlling the Chronothermostat (for example, with
a telephone switchboard, telephone actuator, burglar alarm system, etc.)
NO C
Remote ext.NTC
NC
External NTC sensor
connection
✱
Remote activation
Closed contact =
antifreeze mode
Open contact =
weekly program
(last selected)
To loads to be
checked
✱
The correct use of the probe requires
the application of the sensor on a
surface which gradually reaches the
temperature, not exposed to heat or
solar radiation sources.
Connections
Max conductor size: 2x 2,5 mm2
Voltageless output contact rate: 5(3)A; 250 Vac
NO C
Remote ext.NTC
NC
M
NO C
Remote ext.NTC
NC
NO C
Remote ext.NTC
NC
Wiring diagrams
System used only for heating with
ON/OFF control
Example:
automatic consent in heater
System used only for heating with
OPEN/CLOSE control
Example:
motorized valve control – Open (
NO
)/Close (
NC
)
Heating and cooling system with
ON/OFF control
If you want to control both the heating and cooling
system, set up a two-way switch for selecting
Summer/Winter, as shown in the picture.
When the season changes, set the two-way switch
to the required position and switch over to Summer/
Winter on the Chronothermostat.
Installation
The Chronothermostat can be flush-mounted or wall-mounted using Axolute, Living International, Light and Light Tech boxes, supporting frames and
plates (3 DIN modules).
If it is necessary to lock the Chronothermostat in place (e.g. public places), use the screw supplied at the back of the base.
Wall-mounting
box
Supporting
frame
Front cover
plate
Chronothermostat
1,5m
RAEE/WEEE: bticino.com/disposal
Caution
Remote operation may cause
damage to people or property.
Flat batteries must be disposed of
respecting the laws in force.
