1,3 Megapixel bullet camera with IR LED
17
U
se
r
M
a
n
u
a
l
(8) “Upgrade” button opens the interface to upgrade the
device firmware:
N
Description
1
Select a check box of a device or several devices with same commercial references into this list.
2
Click “Open” button and select the new firmware in the PC directory.
3
Click “Upgrade” button, the devices will be upgraded. Be careful don’t cut off the network
connection.
4
Click “Cancel” button to stop the upgrade.
5
“Add” button configures manually s a new device IP and port.
6
“Return” button comes back to the previous interface.
(10) “Login” button opens the login interface.
- Highlight the network information device (single click in the list)
- Click the “Login” button (or double-click the highlighted line)
- The following page opens:
Note: Here any information cannot be modified. Click the “Login” button in login popup window to open the main interface
mode where the network and system settings can be changed.
6
5
2
3
1
4